Duratec polyester and vinyl ester coatings are used for a variety of applications ranging from mould construction and repair through to vinyl ester spray filling and fairing of  vessels . Products are available for polishing , coating, priming, sealing and putties.
Duratec gives the applicator convenient, air cured, thin to thick film spray technology with less porosity and quick curing time.

• Air cured
• Gelcoat supplement or replacement for ease of spraying and thin film cure
• Clear high build finishes
• Plug and mould building and surfacing
• Mould repairs
• Epoxy compatibility
• Vinyl ester osmosis repair
• Spray fairing vinyl ester

An exceptionally easily sanded primer, versus the Duratec Surfacing Primer which also polishes to a smooth, porosity-free surface. 

• Builds rapidly - yet cures fast  and provides a very easily sanded, low porosity smooth surface
• Low Porosity - provides a super fine leveling and filling system on a variety of substrates with superior release properties.
• Adhesion to most epoxies - with heat distortion level of 201°F, 94°C, it also adheres to fiberglass, properly prepared metal, wood, MDF, brick, concrete and polyurethane foam.
• Rapid coat buildup - to 20 mils, 500 microns, wet on wet, on composite plugs and master mold surfaces; saves time and labor cost.
• VERY easy sanding - saves time and effort. An exceptional primer for polishing or topcoating with Duratec Surfacing Primers and Hi-Gloss Coatings, lacquers and polyurethane paints.

The ultimate high-gloss surface primer for wood, MDF, foam and composite plugs, patterns and models. Duratec Polyester Surfacing Primer provides rapid coat buildup and a smooth surface with high gloss, when required.

• Low porosity - provides a super fine leveling and filling system on a variety of substrates with superior release properties.
• Adhesion to most epoxies - with heat distortion level of 201°F, 94°C, the primer also adheres to fiberglass, properly prepared metal, wood, MDF, brick, concrete and polyurethane foam.
• Rapid coat buildup - to 40 mils, 1000 microns, wet on wet, on composite plugs and master mold surfaces; saves time and labor cost.
• Easy sanding - also saves time and labor. The primer cures to a surface that polishes to a high gloss, when required.

A low-porosity, high-building, fairing and shaping primer for composites, wood, MDF, GRP, foam, plaster and clay.

• Easy to apply - apply with a sprayer, brush or roller.
• Rapid coat buildup - builds quickly between 1 to 3 mm, 40-120 mils, maximum wet-on-wet application with minimum sag on vertical surfaces.
• Quick Shaping - quickly shaped by knife, file or sandpaper.
• Fast air curing - saves time. The primer quickly air cures to an easily sandable surface, which provides a stable base for other coatings.
• High heat distortion temperature - reduces the risk of post-cure or distortion from elevated temperature due to exotherm and consequential print-through of substrates.

Special blends of polyester polymers that produce a tack-free, non-wax high gloss finish with chemical resistance, high impact strength and excellent color and light stability. Used for composite plugs and patterns and wood product surfaces.

Used by boat manufacturers as well as manufacturers of aircraft interiors, architectural woodwork, automotive wood dashboards, furniture and musical instruments. Also used for gelcoat repair applications and for upgrading tooling gelcoats

• Easy to apply - the coatings build quickly and spray easily. You'll save time and labor.
• High gloss - sand and polish to a non-wax, tack-free high gloss finish.
• Stability - the coatings offer clarity (Clear), color (Pigmented) and light stability.
• Superior finish - the coatings produce a hard, chemical-resistant finish.
• Custom colors - for volume applications, the coatings can be color matched to customer requirements.

A high quality "sprayable putty" for fairing and priming composite marine surfaces. An integral part of the Duratec Marine System. For one-off and production composite yacht priming and osmosis and blister repairs. Formulated for below-waterline, topside and deck surfaces

• Application - apply with sprayer, roller or brush. Saves time and labor.
• High build - to 2-4 mils, 80-160 microns, wet on wet, without sagging on vertical surfaces.
• Quick cure - rapid curing; far faster than epoxy resin systems. Primer will be ready to sand in 1-5 hours, depending on thickness and temperature.
• Osmosis and blister resistance - the glass microsphere-filled primer offers excellent resistance against osmosis and blister damage. The vinyl ester chemistry has proven its performance on more than 2000 boats and yachts over a seven-year period.
• Easy sanding - hollow glass microspheres in the primer allow for rapid sanding. Also saves time and labor.

For one-off and production composite yacht priming and osmosis and blister repairs. Formulated for below-waterline, topside and deck applications.

• Application - easily applied with sprayer, roller or brush. Saves time and labor.
• High build - to 40 mils, 1000 microns, wet on wet, without sagging on vertical surfaces.
• Quick cure - rapid curing; far faster than epoxy resin systems. Primer will be ready to sand in 1-4 hours, depending on thickness and temperature.
• Osmosis and blister resistance - proven performance on more than 2000 boats and yachts over a seven-year period

Aqua-Buff 1000 Fast-Cut Compounds
Aqua-Buff 2000 Compound and Polish 

Water-based fast-cut compounds and polish for composites and other surfaces. Used to remove scratches and polish composite patterns, plugs, masters and product molds. 

• Swirl mark-free finish - you'll achieve the ultimate finish shine with Aqua-Buff fast-cut compounds and polish.
• Easy application - apply with a brush or cloth.
• Economical - use only half as much, compared to other compounds.
• Water-based - environmentally friendly.

Click here to visit the manufacturer's website for more information